Removing The Feed Motor - Canon DADF-M1 Service Manual

Chapter 3
[2]
F-3-83
3.4.9.7 Removing the Feed
motor
1) Loosen the 2 screws [1], and move the feed motor
[2] down; then, tighten the 2 screws [1] you have
loosened.
[1]
F-3-84
When mounting it, loosen the screws [1] to put it
back to its initial position.
2) Disconnect the connector [1], and remove the 2
screws [2]; then, detach the feed roller [3].
3-22
[1]
[3]
0003-8069
[2]
[1]
[2]
[1]
F-3-85
When mounting it, be sure that that timing belt [1]
is properly attached to the pulley [2].
[1]
F-3-86
3.4.9.8 Removing the Platen
Roll Downstream Unit
1) Remove the screw [1], and detach the platen
downstream roll unit [2].
[3]
[2]
[2]
0004-0446