Removing The Cooling Fan; Removing The Feed Motor; Removing The Feed Guide - Canon DADF-M1 Service Manual

[1]
[3]
F-3-104
3.4.11.6 Removing the Cooling
Fan
1) Remove the screw [1], and disconnect the
connector [2]; then, detach the cooling fan [3].
[2]
F-3-105
3.4.11.7 Removing the Feed
motor
1) Loosen the 2 screws [1], and move the feed motor
[2] down; then, tighten the 2 screws [1] you have
loosened.
[1]
F-3-106
[1] [2]
0004-1944
[1]
[3]
0004-1945
[2]
[1]
When mounting it, loosen the screws [1] to put it
back to its initial position.
2) Disconnect the connector [1], and remove the 2
screws [2]; then, detach the feed roller [3].
[2]
[1]
F-3-107
When mounting it, be sure that that timing belt [1]
is properly attached to the pulley [2].
[1]
F-3-108
3.4.11.8 Removing the Feed
Guide
1) Open the open/close guide [1]; then, remove the 2
screws [2], and disconnect the connector [3] to detach
the feed guide [4].
Chapter 3
[3]
[2]
[2]
0004-5586
3-27