Removing The Locking Motor Drive Unit; Removing The Locking Motor; Drive Unit; Removing The Rear Cover - Canon DADF-M1 Service Manual

Chapter 3
connectors [2]; then, detach the harness guide [3].
[2] [1]
[2]
[3]
F-3-23
3.3.4.3 Removing the Locking
Motor Drive Unit
1) Remove the 3 screws [1], and disconnect the
connector [2]; then, detach the locking motor drive
unit [3].
[1]
[3]
F-3-24
3.3.4.4 Removing the Locking
Motor
1) Remove the 2 screws [1].
F-3-25
2) Remove the 2 screws [1], and disconnect the
3-8
[2]
0003-7178
[1] [2]
0003-7180
[1]
connector [2]; then, detach the delivery reversal motor
[3].
[3]
[2] [1]
F-3-26
When mounting it, be sure that the motor harness
is not trapped.

3.3.5 Drive Unit

3.3.5.1 Removing the Rear
Cover
1) Open the feeder cover [1] and the original pickup
tray [2]; then, remove the 4 screws [3], and detach the
rear cover [4].
[2]
F-3-27
3.3.5.2 Removing the Harness
Guide (right rear)
1) Remove the screw [1], and disconnect the 4
connectors [2]; then, free the harness form the harness
0004-0691
[1]
[3]
[4]
0004-0818