Main Unit; Removing The Upper Feed Guide Unit; Removing The Processing Tray Unit - Canon Inner Finisher-K1 Service Manual

Main Unit

Removing the Upper Feed
Guide Unit
■ Preparation
1. Remove the machine from the host machine.
"Removing this Machine from the Host Machine" on
page 44
2. Remove the Front Cover
Cover Unit" on page 51
3. Remove the Rear Cover."Removing the Rear Cover"
on page 51
■ Procedure
CAUTION:
Be sure not to lost the Gear [1] and the Pin [2] when
disassembling/assembling.
[1]
1. Remove the Cable Guide [1].
• 1 Connector [2]
• 1 Screw [3]
• 1 Claw [4]
1x
[4]
1x
Unit."Removing the Front
[2]
[1]
[2]
[3]
4. Parts Replacement and Cleaning
2. Remove the 1 Clip [1] and 1 Bushing [2].
[1]
3. Remove the Upper Feed Guide Unit [1].
• 2 Screws [2]
2x
Removing the Processing
Tray Unit
■ Preparation
1. Remove the machine from the host machine.
"Removing this Machine from the Host Machine" on
page 44
2. Remove the Front Cover
Cover Unit" on page 51
3. Remove the Rear
on page 51
4. Remove the Delivery
Tray" on page 51
5. Remove the Upper Feed Guide
Upper Feed Guide Unit" on page 55
6. Remove the Staple-free Staple
Staple-free Staple Unit" on page 60
7. Remove the Tray Guide
Guide Cover" on page 53
55
[2]
[2]
[1]
Unit."Removing the Front
Cover."Removing the Rear Cover"
Tray."Removing the Delivery
Unit."Removing the
Unit."Removing the
Cover."Removing the Tray