No.1 Registration Roller Roll - Canon DADF-M1 Service Manual

Chapter 3
[1]
[2]
F-3-40
3.4.3.4 Adjusting
Separation Pressure
Memo
Make the following adjustments if such feeding faults
as multiple feeding occur.
Pressure adjusting
roll
Side A
Side B
1) Turn over the pressure adjusting roll [1] (found
fitted to the spring), and fit it in place (turn it over
from side A to side B).
3-12
[3]
the
0003-3495
T-3-1
Separation
pressure
low
high
F-3-41
When fitting the spring in place, be sure it is
oriented correctly, i.e., the spring [1] with a bend
being upstream in relation to feed direction.
[1]
F-3-42

3.4.4 No.1 Registration Roller Roll

3.4.4.1 Removing the Front
Cover
1) Remove the 3 screws [1], and detach the front cover
[2] by moving it in the direction of the arrow.
[1]
0003-7215