Separation Sensor; Removing The Inside Cover; Read Sensor; Removing The - Canon DADF-M1 Service Manual

Chapter 3
[3]
[2]
F-3-147

3.5.5 Separation Sensor

3.5.5.1 Removing the Inside
Cover
1) Open the feeder cover, and remove the 2 screws [1];
then, detach the inside cover [2].
F-3-148
3.5.5.2 Removing
Separation Read Sensor
1) Remove the 2 screws [1], and disconnect the
connector [2]; then, detach the separation rear sensor
[3].
3-38
[1]
[2]
[1]
0004-0518
[1]
[2]
the
0004-0520
F-3-149
[3]
F-3-150
Be sure to perform sensor adjustment if you have
replaced the sensor PCB.

3.5.6 Read Sensor

3.5.6.1 Removing the Front
Cover
1) Remove the 3 screws [1], and detach the front cover
[2] by moving it in the direction of the arrow.
[1]
[2]
0004-0535