Removing The; Removing The Feeder Cover - Canon DADF-M1 Service Manual

[1]
[1]
[2]
F-3-43
3.4.4.2 Removing the Feeder
cover
1) Remove the E-ring [1].
[1]
F-3-44
2) Remove the screw [1] and the positioning pin[2];
then, detach the feeder cover [3].
3.4.4.3 Removing the No. 1
Registration Roller Roll
1) Remove the 4 screws [1], and detach the cover.
0004-6031
2) Remove the screw [1], and detach the support plate;
then, detach the No. 1 registration roller roll [2].
[3]
[2]
[1]
F-3-45
[1]
[2]
F-3-46
F-3-47
Chapter 3
0003-7220
[1]
3-13