Tape Width; Tape Roll Diameter; Tape Application Leg Length - Optional; Box Board - 3M 7000R Instructions And Parts List

4. Specifi cations

4.5 Tape Width

4.6 Tape Roll Diameter

4.7 Tape Width - Standard

4.8 Box Board

4.9 Box Weight and Size Capacities

Minimum 6" [152]
Maximum N/A
3M-Matic 7000r-7000r3 Pro
™
Page 15
(continued)
50mm [2 inches] minimum to 72mm [3 inches] maximum
Up to 405mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
70mm ± 6 mm [2.75 inch ±. 25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 25 inch]
(See "Removing Taping Heads Procedure – Changing the Tape Leg Length")
Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C fl ute.
23-44 lbs. per inch of width Edge Crush Test (ECT)
A. Box Weight, fi lled: 5 lbs.– 85 lbs. [2.3 kg–38.6 kg]. Contents must support fl aps.
B. Box Dimensions for 7000r Pro and 7000r3 Pro Machines: Inches [mm]
* Boxes narrower than 8 inches [200mm] may require more frequent belt replacement
because of limited contact area.
To accommodate smaller or larger boxes, machine upper taping head frame and/
or outer column assemblies can be repositioned as described in "Special Set-Up
Procedure" section of this manual. Refer to illustration/chart for box height range
possibilities by adjusting machine upper frame and/or outer column positioning.
Length Width
6 1/2" [165]* 4 1/2" [115]
26" [660] 26"
fi lm tapes.)
®
A Standard Pos. B Fully Raised Pos. C Lowered Pos.
AG 3 Tape Leg
(i.e. 2 3/4" [70])
12 1/2" [317]
[660] 36"
Tape Leg 2" [70]
(AG3/no bumper)
2 1/4" [57]
[914] 25 1/2" [647]
NA - ENG
April 2016