Plastic Ties Removal; Assembly Completion / Machine Set-Up - 3M 7000R Instructions And Parts List

7. Installation
7.5 Removal of Plastic TIes
7.6 Assembly Completion /
3M-Matic 7000r-7000r3 Pro
™
Page 22
(continued)
Cut the plastic which attaches the
top head to the frame and remove
the polystyrene blocks (Figure 7-4).
Cut the plastic strap which attaches
the strip and the EMERGENCY STOP
cable to the frame (Figure 7-5).
Cut the plastic ties holding the
lower taping head in position
(Figure 7-6).
Machine Set-up
Note – A tool kit consisting of metric
open end and hex socket
wrenches is provided with
the machine. These tools
should be adequate to
set-up the machine, however,
other tools supplied by the
customer will be required for
machine maintenance
(see the Technical
Documentation/
Spare Parts-Order Section) .
Figure 7-4
Figure 7-5
Figure 7-6
NA - ENG
April 2016