3M 7000R Instructions And Parts List page 71

16. Technical Documentation and Information
7000r-7000r3 Pro Random
Case Sealer, Type 11500
Frame Assemblies
To Order Parts:
1. Refer to fi rst illustration,
2. Refer to the appropriate Figure
3. The Parts List that follows
Note – The complete description
4. Order parts by Part Number,
5. Refer to the fi rst page of this
Important – Not all the parts
3M-Matic 7000r-7000r3 Pro
™
Page 59
Frame Assemblies, for the
Figure Number that identifi es
a specifi c portion of the machine.
or Figures to determine the
parts required and the parts
reference number.
each illustration, includes the
Reference Number, Part Number
and Part Description for the parts
on that illustration.
has been included for standard
fasteners and some commercially
available components. This has
been done to allow obtaining
these standard parts locally,
if desired.
Part Description and Quantity
required. Also include the
model/machine name, machine
type, and serial number that are
located on the identifi cation plate.
instruction manual "Replacement
Parts and Service Information"
for replacement parts ordering
information.
listed are normally stocked
items. Some parts or
assemblies shown are
available only on special
order. Contact 3M/Tape
Dispenser Parts to confi rm
item availability
(continued)
Options and Accessories
For additional information on the options and
accessories listed below - contact your
3M Representative.
Part Number Option / Accessory
70-0064-2998-2 Caster Kit Attachment
70-0067-5966-9 Conveyor Extension Attachment
78-8069-3926-6 Low Tape Sensor Kit
70-0064-4963-4 AccuGlide™ 3 Upper Taping
70-0064-4962-6 AccuGlide™ 3 Lower Taping
70-0064-4965-9 AccuGlide™ 3 Upper Taping
70-0064-4964-2 AccuGlide™ 3 Lower Taping
70-0064-1097-4 Tape Application Monitor (TAM)
70-0064-1104-8 Tape Application Monitor -
78-8095-4854-4 Tape Edge Fold Attachment -
78-8095-4855-1 Tape Edge Fold Attachment -
70-0067-3769-9 Filler Plate - Lower
Head - 2 inch, Type 10800
Head - 2 inch, Type 10800
Head - 3 inch, Type 10800
Head - 3 inch, Type 10800
Tape Outboard
Upper Head 2 inch
Lower Head 2 inch
NA - ENG
April 2016