Download
Share
Print this page
3M Matic 7000a Pro Instructions And Parts List
  1. Manuals
  2. Brands
  3. 3M Manuals
  4. Food Saver
  5. 3M-Matic 7000a Pro
  6. Instructions and parts list

3M Matic 7000a Pro Instructions And Parts List

Adjustable case sealer with accuglide 3 taping heads
Hide thumbs Also See for Matic 7000a Pro:

Advertisement

Quick Links

Download this manual
3M
Science.
Applied to Life.™
Instructions and Parts List
3M-Matic
Pro
Type 22100
Adjustable Case Sealer with
AccuGlide
Serial#: _____________________ _
Important Safety Information
BEFORE INSTALLING OR OPERATING THIS EQUIPMENT
Read, understand and follow all safety and operating instructions.
Spare Parts
It is recommended you immediately order the spare parts listed in the "Spare
Parts/Service Information" section. These parts are expected to wear through
normal use, and should be kept on hand to minimize production delays.
3M-Matic" 7000a-7000a3 Pro
Pagei
™
7000a-7000a3
™
3 Taping Heads
For reference, record machine serial number here.
NA-ENG
January 2023
44-0009-2132-8

Advertisement

loading
Need help?

Need help?

Do you have a question about the Matic 7000a Pro and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for 3M Matic 7000a Pro

Summary of Contents for 3M Matic 7000a Pro

  • Page 1 It is recommended you immediately order the spare parts listed in the "Spare Parts/Service Information" section. These parts are expected to wear through normal use, and should be kept on hand to minimize production delays. NA-ENG 3M-Matic" 7000a-7000a3 Pro Pagei January 2023 44-0009-2132-8...
  • Page 2 44-0009-2132-8...
  • Page 3 44-0009-2132-8...
  • Page 4 44-0009-2132-8...
  • Page 5 44-0009-2132-8...
  • Page 6 44-0009-2132-8...
  • Page 7 44-0009-2132-8...
  • Page 8 44-0009-2132-8...
  • Page 9 44-0009-2132-8...
  • Page 10 44-0009-2132-8...
  • Page 11 44-0009-2132-8...
  • Page 12 44-0009-2132-8...
  • Page 13 The 7000a-7000a3 Pro is manually adjustable to a wide range of box sizes (see "Specifications Section - Box Weight and Size Capacities"). The 3M-Matic'" case sealing machines have been designed and manufactured in compliance with the legal requirements at the date of inception.
  • Page 14 (ELV), a definition of symbols, plus a parts list of the 3M- Matic'" 7000a-7000a3 Pro Adjustable Case Sealer. 3M Industrial Specialties Division 3M Center, Bldg.

  • Page 15: General Information

    2. General Information 2.1 Data Identifying Manufacturer and Machine 3M I ndustriat Adh es1ives, andl"apes, 3M Center 'B :dg •. Z20-5E..J06 St Paul, MN 44-- GOO tUSA) Data for Technical Assistance and Service Agent/Distributor or Local After Sale Service: ™...

  • Page 16: Warranty

    If any part is proved to be defective within its warranty period, then the exclusive remedy and 3M's and seller's sole obligation shall be, at 3M's option, to repair or replace the part, provided the defective part is returned immediately to 3M's factory or an authorized service station designated by 3M.
  • Page 17 44-0009-2132-8...
  • Page 18 Never put your hands inside any part the machine is running. of the machine while it is working. Serious injury may occur (Figure 3-4). ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 6 44-0009-2132-8...
  • Page 19 - Keep hands, hair, loose clothing, and jewelry away from box compression rollers and all moving parts. - Always feed boxes into the machine Figure 3-8 by pushing only from the end of box. ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page? 44-0009-2132-8...
  • Page 20 - Allow only properly trained and qualified - The operator must pay attention personnel to operate and service this to the blades during the tape equipment. replacement. ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 8 44-0009-2132-8...
  • Page 21 Running with safety Extraordinary mechanical maintenance protections disabled Extraordinary electrical maintenance Stopped by pressing Adjusting box size the EMERGENCY STOP Tape replacement button Blade replacement Electric power Drive belt replacement disconnected Ordinary maintenance ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page9 44-0009-2132-8...
  • Page 22 44-0009-2132-8...
  • Page 23 44-0009-2132-8...
  • Page 24 44-0009-2132-8...

  • Page 25: Specifications

    The machine is equipped with two 1/4 HP gearmotors and comes with an 2.4m [8 foot] standard neoprene covered power cord and a grounded plug. Contact your 3M Rep­ resentative for power requirements not listed above. Contact your 3M Representative for power requirements not listed above.
  • Page 26 "Special Set-Up Procedure" section of this manual. Refer to illustration/chart for box height range possibilities by adjusting machine upper frame and/or outer column positioning. ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page14 44-0009-2132-8...
  • Page 27 44-0009-2132-8...
  • Page 28 44-0009-2132-8...
  • Page 29 - Do not stack anything over the machine. - It is possible to stack a maximum Figure 5-4 of 2 machines (if they are in their original packing). ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page17 44-0009-2132-8...
  • Page 30 - Special bag of laminated polyester/ aluminum/Polyethylene (sea freight package only) - Polyethylene protective material For the disposal of the above materials, please follow the environmental directives or the law in your country.• Figure 6-5 ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page18 44-0009-2132-8...

  • Page 31: Installation

    4 - Repeat the operation for all legs. (It is not necessary to fix or anchor the machine to the floor). 5 - For Outer Column Repositioning- See Special Set-up Procedure (Section 11). Figure 7-3 ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page19 44-0009-2132-8...
  • Page 32 44-0009-2132-8...
  • Page 33 Connect the power cord supplied with the end of the lower frame machine to a wall socket using a plug which (as shown in Figure 7-9). complies with the safety regulations of your country. ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 21 44-0009-2132-8...

  • Page 34: Theory Of Operation

    E-Stop Location failure or when the machine is disconnected from the mains. 8.3.2 Emergency Stop The LATCHING EMERGENCY STOP BUTTON is located on the top center of the machine (Figure 8-3). ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 22 44-0009-2132-8...
  • Page 35 44-0009-2132-8...

  • Page 36: On/Off Switch

    - Allow only properly trained and qualified • Have wire size 1.5mm dia. [AWG 16) personnel to operate and service this • Have a max. length 30.Sm [100 ft] equipment. • Be properly grounded. ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 24 44-0009-2132-8...

  • Page 37: Setup And Adjustments

    6. Refer to Manual 2, "Adjustments-Changing Tape Leg Length", for taping head setup. 7. Replace taping heads in the reverse order of disassembly. Important! Taping Heads - Turn off Electric Power ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 25 44-0009-2132-8...
  • Page 38 44-0009-2132-8...
  • Page 39 An additional adjustment can be made to reach Maximum Height. This additional height adjustment can be made by moving the Upper Assembly Crossbar up to the top holes - (Figure 11-8). Figure 11-8 ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 27 44-0009-2132-8...

  • Page 40: Operation

    OFF (O) 1. Taping units blade guard switch on the main and disconnect 2. Latching emergency stop button electric power (Figure 12-3) . 3. STOP (OFF) (O) main switch ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 28 44-0009-2132-8...

  • Page 41: Troubleshooting Guide

    Worn or missing friction rings Replace friction rings Adjust belt tension Drive belt tension too low Electrical disconnect Check power and electrical plug Motor not turning Evaluate problem and correct on next page) (continued ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 29 44-0009-2132-8...
  • Page 42 The blade is not cutting tape properly Refer to tape cutting problems The tape is threaded incorrect Rethread tape Applying mechanism spring Move spring hook to next has too little tension tighter hole ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 30 44-0009-2132-8...

  • Page 43: Maintenance And Repairs

    If this dust is allowed to build up on taping heads. machine components, it can cause ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 31 44-0009-2132-8...
  • Page 44 44-0009-2132-8...
  • Page 45 44-0009-2132-8...
  • Page 46 44-0009-2132-8...
  • Page 47 44-0009-2132-8...
  • Page 48 44-0009-2132-8...

  • Page 49: Additional Instructions

    Use a fire extinguisher that is rated for electrical fires - ( Figure 14-2 ) . Figure 14-2 15. Additional Information 15.1 Statement of Conformity 15.2 Emission of Hazardous Substances Nothing to report ™ NA-ENG 3M-Matic 7000a-7000a3 Pro January 2023 Page 37 44-0009-2132-8...
  • Page 53 44-0009-2132-8...
  • Page 54 44-0009-2132-8...

  • Page 55: Technical Documentation And Information

    Options and Accessories Case Sealer, Type 22100 For additional information on the options and Frame Assemblies accessories listed below - contact your 3M Representative. To Order Parts: Part Number Option / Accessory 1. Refer to first illustration, Frame Assemblies, for the Figure...
  • Page 56 44-0009-2132-8...
  • Page 57 44-0009-2132-8...
  • Page 58 44-0009-2132-8...
  • Page 59 44-0009-2132-8...
  • Page 60 44-0009-2132-8...
  • Page 61 44-0009-2132-8...
  • Page 62 44-0009-2132-8...
  • Page 63 44-0009-2132-8...
  • Page 64 44-0009-2132-8...
  • Page 65 44-0009-2132-8...
  • Page 66 44-0009-2132-8...
  • Page 67 44-0009-2132-8...
  • Page 68 44-0009-2132-8...
  • Page 69 44-0009-2132-8...
  • Page 70 44-0009-2132-8...
  • Page 71 44-0009-2132-8...
  • Page 72 44-0009-2132-8...
  • Page 73 44-0009-2132-8...
  • Page 74 44-0009-2132-8...
  • Page 75 44-0009-2132-8...

This manual is also suitable for:

Matic 7000a3 pro22100