Power Requirements; Operating Rate; Operating Conditions; Tape - 3M 7000R Instructions And Parts List

4. Specifi cations

4.1 Power Requirements:

Pneumatic: 90PSIG [6.2 bar], 11.6 SCFM [1200 NL/Min] Peak Usage.
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord
and a grounded plug. Contact your 3M Representative for power requirements not
listed above.

4.2 Operating Rate:

4.3 Operating Conditions

4.4 Tape

Scotch
3M-Matic 7000r-7000r3 Pro
™
Page 14
Electrical: 115 VAC, 60 Hz, 6.4 A , 1/4 hp (720 watts)
Belt speed is 0.5m/s [100 F.P.M.]
Actual production rate is dependent on operator's dexterity.
Boxes must be 18 inches (457mm) apart minimum.
Use in dry, relatively clean environments at 5
dry boxes.
Note: Machine should not be washed or subjected to conditions causing moisture
condensation on components.
• To reduce the risk associated with fi re and
explosion hazards:
− Do not operate this equipment in potentially
fl ammable or explosive environments.
pressure-sensitive fi lm box sealing tapes.
®
C to 50 C [40
o o
WARNING
F to 120 F] with clean,
o o
NA - ENG
April 2016