Operation - ADJ ENTOUR ICE User Manual

O P E R A T I O N
The LCD Display is easy to read and displays functions and operation controls.
Preset XX°C: Displays the default target water temperature. The preset temperature can be set to
65, 70, 75 or 80 degrees Celsius.
Current T. = XX°C: Displays the current water temperature. If the current temperature is lower than
the preset temperature, the Celsius symbol will flash and continue to flash until the target
temperature is reached.
LOW: Low temperature warning. When water is added to the unit and the temperature is 39 degrees
Celsius or below, "LOW" will flash on the upper right corner of the display. Note: If the water
temperature is above 40 degrees but below the desired preset temperature, smoke may still function
but output may not be optimal.
WARNING MESSAGES
Water Level Low: Indicates that the current water level is too low. Note: If the water level is too
low, the heater will not power on and the menu will be inaccessible until water is added.
Heater Overheat: Indicates that the water temperature is too high. Please check water temperature
and thermostat connection.
14