Operation - ADJ POCKET PRO User Manual

Pocket Pro / Pocket Pro Pearl
Universal DMX Control: This function allows you to use a universal DMX-512 controller to control
the colors, gobos, dimmer and strobe. A DMX controller allows you to create unique programs tai-
lored to your individual needs.
1. The Pocket Pro / Pocket Pro Pearl has 2 DMX channel modes; 11 channel mode or 13 channel
mode.
2. To control your fixture in DMX mode, follow the procedures in the Set Up section of this manual
as well as the set-up specifications that are included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions in the System Menu section of this manual to select your desired DMX
channel mode and set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
7. For help operating in DMX mode consult the manual included with your DMX controller.
Sound Active Mode: This mode allows either single unit or several units linked together, to run to
the beat of the music.
1. Press the MENU button until "Sound Mode" is displayed, and press ENTER. Press the UP or
DOWN buttons so that "ON" is displayed and press ENTER.
2. Press the MENU button until "Sound Sense" is displayed, and press ENTER. Use the UP and
DOWN buttons to adjust the sound sensitivity. Press ENTER when you have found your desired
sensitivity level.
Show Mode: This mode allows either a single unit or several units linked together, to run one of four
shows that you choose.
1. Press the MENU button until "Show Mode" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until you find your desired show, and press ENTER.
ADJ Products, LLC - www.adj.com - Pocket Pro / Pocket Pro Pearl User Manual Page 16

Operation