ADJ ENTOUR ICE User Manual page 15

O P E R A T I O N ( W I T H O U T D M X )
When there is no DMX signal detected, the Entour Ice can function in one of three settings
(Continuous Fogging, Timed Fogging or Manual Fogging Operation).
Continuous Fogging Operation:
1. Press the HOLD button or SMOKE ON/OFF button to start the Continuous setting.
The volume can be set between 10% and 100% by pressing the UP or DOWN button.
a. To switch from Continuous Fogging Operation to Timed Fogging Operation, press the
TIMER button.
2. To exit Continuous Fogging Operation and return to the previous setting, press the HOLD
button or SMOKE ON/OFF button.
Timed Fogging Operation:
1. Press the FUNCTION button to select the Duration setting.
The duration can be set between 10 and 250 seconds by pressing the UP or DOWN button.
2. Press the FUNCTION button to select the Interval setting.
The interval can be set between 10 and 250 seconds by pressing the UP or DOWN button.
3. Press the FUNCTION button to select the Volume setting.
The volume can be set between 10% and 100% by pressing the UP or DOWN button.
4. Once the values are set for duration, interval and volume press TIMER to enter Timed
Fogging mode.
a. To switch from Timed Fogging Operation to Continuous Fogging mode, press the
HOLD button.
5. To exit Timed Fogging Operation
Manual Mode: Manual fogging mode can take priority over any mode as long as heating is
completed and the unit is ready for output.
1. To enter Manual mode, press and hold the MANUAL button.
2. While the button is held, Manual mode (with maximum output) will be activated.
3. To exit Manual mode and return the unit to the previous setting, release the MANUAL button.
and return the unit to the previous
15
setting, press TIMER.