Table of Contents
Advertisement
A D J R F C O P E R AT I O N
The ADJ RFC remote (sold seperately) has many different functions and allows you to control your
Mega Bar RGBA at a distance of up to 150 ft. The device's RF (remote function) receiver must be
switched on in order to use the RFC remote.
BLACKOUT: Pressing this button will blackout the fixture.
AUTO RUN: This button will run an automatic program. You can also adjust the fade speed and the
flash speed of the Auto Run program.
•
For fade speed, press the Flash button twice and then adjust the fade speed using the "+" and "-"
buttons.
•
For flash speed, press the Flash button once to enter Flash Mode, and use the "+" and "-" buttons
to adjust the Flash speed.
PROGRAM SELECTION: This button will activate 1 of 2 modes: Color Select Mode or Built-In Pro-
grams Mode.
•
When the Red LEDs flash, the unit is in Color Static mode. Use the "+" or "-" to scroll through the
15 colors. Once you have found the desired color, press the Flash Button to activate strobing, then
use the "+" or "-" to adjust the Flash rate.
•
When the Green LEDs flash, the unit is in Built-In Program mode. Use the "+" or "-" to scroll
through the 22 built-in programs. Once you have found your desired program, press the SPEED
button and then use the "+" and "-" buttons to adjust the program speed. You can press the Flash
Button to activate strobing and use the "+" or "-" to adjust the Flash rate. Press the Flash but-
ton twice to enter the Fade speed adjustment and use the "+" and "-" buttons to adjust the Fade
speed.
FLASH: This button will activate the flash (strobe) effect. You can control the flash speed by pressing
the "+" and "-" buttons.
SPEED: Press this button and use the "+" & "-" buttons to adjust the speed of the Built in Programs.
SOUND ACTIVE: This button activates sound active mode. Use the "+" & "-" buttons to adjust the
sound sensitivity level.
R G B W/A: Press one of these buttons and then press the "+" or "-" to adjust the brightness of the
selected color.
"+" and "-": Use these buttons to adjust the flash rate, speed of the Auto Run and built in programs,
sound sensitivity, and output intensity, or to scroll through the static colors and built in programs.
9
Advertisement
Table of Contents
