Table of Contents
Advertisement
O P E R AT I O N
LOADING FIXTURE PROFILES
NOTE: The WiFly NE1 comes pre-loaded with Generic fixture profiles, which include RGB, RGBW,
RGBA, RGBWA, RGB- WAU, TRI-WHITE, 36CH 8-Bit ML (M1), and 36CH 16-Bit ML (M2). See the
Generic fixture traits chart section on page 18 for channel details. All other profiles can be loaded from
the USB stick, which is included. The USB stick includes several ADJ profiles, which are compatible
with this controller. Because the file names are abbreviated, due to character limitations, please us the
"Fixture Profile Details" PDF list to cross reference the files. So your controller runs at optimum speed,
please only load the profiles that you will be using. A maximum of 65 pro- files can be loaded at a time.
1. With the controllers power switch OFF, insert the included USB drive into the controllers USB port
and power ON the con- troller.
2. Press and hold down the SET-UP button for two seconds to enter the main menu.
3. Select menu option 1 (Load Light Lib) by pressing the DIAL/ ENTER dial then turn the DIAL/ENTER
dial to find the profile that you wish to load.
4. Once you have located the profile, press the DIAL/ENTER dial to load it. The display will momentarily
read "Operation Complete". Repeat steps 3 and 4 to load additional profiles or press the ESC/PAGE
button to exit.
Delete Light Lib
1. Press and hold the SET-UP button for two seconds to enter the main menu.
2. Turn the DIAL/ENTER dial to menu option 2 (Delete Light Lib). Press the DIAL/ENTER dial to enter.
3. Turn the DIAL/ENTER dial to find the profile that you wish to delete or select "delete all lib" to delete
all profiles. Press the DIAL/ENTER dial to enter.
4. Turn the DIAL/ENTER dial to select "Yes". Press the DIAL/ ENTER dial to enter. Press the ESC/
PAGE button to exit.
Patch Light Lib
1. Press and hold the SET-UP button for two seconds to enter the main menu.
2. Turn the DIAL/ENTER dial to menu option 3 (Patch Light Lib). Press the DIAL/ENTER dial to enter.
3. Turn the DIAL/ENTER dial to find the profile that you wish to patch. Press the DIAL/ENTER dial to
enter.
4. Press the fixture button(s), 1-12, that you wish to patch the selected profile to and turn the DIAL/
ENTER dial to set the starting address. Press the DIAL/ENTER dial to enter. Press the ESC/PAGE
button to exit.
Delete Patch Light
1. Press and hold the SET-UP button for two seconds to enter the main menu.
2. Turn the DIAL/ENTER dial to menu option 4 (Delete Light Patch) then select the fixture(s), 1-12, that
you wish to delete from the patch. Press the DIAL/ENTER dial to execute.
3. Turn the DIAL/ENTER dial to select "Yes". Press the DIAL/ ENTER dial to execute.
Edit Light Lib
Note: WiFly NE1 allows for channel defaults to be set for PAN, TILT, COLOR, and GOBO channels
when the profile is being created. If you wish to edit these defaults or set automatic de- faults for other
channels, this is where you do this.
1. Press the SET-UP button for two seconds to enter the main menu.
2. Select the fixture(s), 1-12, that you wish to edit. Turn the DIAL/ENTER dial to menu option 5 (Edit
Light Lib). Press the DIAL/ENTER dial to enter. Turn the DIAL/ENTER dial to select the fixture that
you wish to edit. Press the DIAL/ENTER dial to save and confirm.
3. Turn the EFFECT dials, 1-4, to adjust the relevant channel data. Turn the DIAL/ENTER dial to
access additional channels. Press the DIAL/ENTER dial to save and confirm.
13
Advertisement
Table of Contents
