Adj Rfc Operation - ADJ WIFLY BAR QA5 User Manual

The ADJ RFC remote (sold seperately) has many different functions and allows you to control
your WiFly Par QA5 from long distance. The ADJ RFC remote can control your system from a dis-
tance of up to 150 ft. To use the RFC you must first activate the fixtures receiver, as described in the
Operating Instructions section of this manual.
BLACKOUT - Pressing this button will blackout the fixture.
AUTO RUN - This button will run an automatic program. Press the FLASH button once to enter
Flash mode, then use the "+" and "-" buttons to adjust the flash rate. Press the FLASH button again
to enter Fade time adjustment, and use the "+" and "-" buttons to adjust the fade time.
PROGRAM SELECTION - This button will activate either Color Select mode or Built-In Programs.
Each press of this button will toggle between the two modes.
• In Color Select mode: Use the "+" or "-" buttons to scroll through the 15 selectable colors. Once
you have found your desired color, press the Flash Button to activate strobing and use the "+" or
"-" to adjust the Flash rate.
• In Built-In Program mode: Use the "+" or "-" buttons to scroll through the built-in programs. Once
you have found your desired program, press the SPEED button, and then use the "+" and "-"
buttons to adjust the program speed. Press the Flash Button to activate strobing and use the "+"
or "-" to adjust the Flash rate. Press the FLASH button again to enter Fade time adjustment, and
use the "+" and "-" buttons to adjust the fade speed.
FLASH - This button will activate the flash (strobe) effect or fade time adjustment. You can adjust the
flash speed by pressing the "+" and "-" buttons.
SPEED - Press this button and use the "+" and "-" buttons to adjust the speed of the Auto run and
Programs.
SOUND ACTIVE - This button activates sound active mode. Use the "+" or "-" buttons to adjust the
sound sensitivity.
R G B W/A - Press any one of these buttons to select a color, then press the "+" or "-" buttons to
adjust the brightness.
"+" and "-" - Use these buttons to adjust the flash rate, fade time, speed of the Auto Run or
Program, sound sensitivity, and color select.

ADJ RFC OPERATION

15