Operation - ADJ Startec STINGER User Manual

Stinger
Universal DMX Control: This function allows you to use a universal DMX-512 controller to control
the patterns, rotation and strobing. A DMX controller allows you to create unique programs tailored
to your individual needs.
1. The Stinger is a 10 DMX channel DMX fixture. See the DMX Traits section of this manual for
detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures described in the Set Up sec-
tion of this manual, as well as the set-up specifications that are included with your DMX control-
ler.
3. Follow the instructions in the System Menu section of this manual to set the DMX address.
4. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
5. For help operating in DMX mode consult the manual included with your DMX controller.
Sound Active Mode: This mode allows a single unit or several units linked together, to run to the
beat of the music.
1. Press the MENU button until "Soun" is displayed, and press ENTER.
2. Press the UP or DOWN buttons to either activate sound active mode or deactivate, and press
ENTER. The unit will now run to the beat of the music.
3. The sound sensitivity can be adjusted by pressing the MENU button until "Sens" is displayed,
and then press ENTER. Use the UP or DOWN buttons to adjust the sound sensitivity, 0 being the
least sensitive, and 99 being the most sensitive.
Show Mode: This mode allows a single unit or several units linked together, to run to a built-in pro-
gram.
1. Press the MENU button until "Show" is displayed, and press ENTER.
2. Press the UP or DOWN buttons to find your desired show and press ENTER. The unit will now
run your chosen built-in program.
ADJ Products, LLC - www.adj.com - Stinger User Manual Page 12

Operation