1.3.1.4 Resetting Alarms
1
Spot Welding Application Using an Air Gun
1.3
Teaching
The alarm reset signal to all connected welders remains ON while
[INTERLOCK] and [WELD ALM RESET] are being pressed
simultaneously. The welding conditions, gun pressure and weld request
are reset with this function.
The output destination must be allocated in the spot input/output
allocation information window before this function is used.
For information on signal allocation method, see
SUPPLE-
chapter 1.6.5
MENT
1-7
"I/O Allocation".
15 of 56