1.3.1.3 Welding On/Off
1
Spot Welding Application Using an Air Gun
1.3
Teaching
Press [INTERLOCK] and [WELD ON/OFF] simultaneously in the teach
mode to turn on or off the welding ON/OFF signal to all connected
welders.
A user message appears when the welding ON/OFF signal is turned ON
in the teach mode.
During manual spot welding, the welding current flows only when this
message appears.
The output destination must be allocated in the spot input/output
allocation information window before this function is used.
For information on the signal allocation method, see
SUPPLE-
chapter 1.6.5
MENT
1-6
"I/O Allocation".
14 of 56