I/O Allocation; Input Allocation Window - YASKAWA YRC1000 Operator's Manual

1.6.5 I/O Allocation

1.6.5.1 Input Allocation Window

1 Spot Welding Application Using an Air Gun
1.6 Spot Gun Motion Control
The I/O necessary for each welder can be set in the general-purpose I/O
signal. The following signals are specified on the pseudo input signal
window.
• Timer Cooling Water Error
• Gun Cooling Water Error
• Transthermo Error
• Air Pressure Decrease
• Weld On/Off
1. Select {SPOT WELDING} under the main menu.
2. Select {I/O ALLOCATION}.
– The input allocation window appears.
3. Specify the signal number.
– Input the numerical value of the desired signal number, and press
[ENTER].
1-37
45 of 56