Cleaning The Optical Parts; Cleaning The Lens - Trotec Speedy 300 fiber Operation Manual

8017 Trotec Speedy 300 fiber
MAINTENANCE

5.2 Cleaning the Optical Parts

Trotec recommends to use following cleaning material:
Lens tissues
Lens cleaner
The lens has a durable multi-coating and won't be damaged by correct and careful
cleaning. You should inspect the mirrors and the lens according the maintenance plan. If
you discover a veil of haze or dirt, you must clean them.
Follow the instructions below for the cleaning of optical parts:

5.2.1 CLEANING THE LENS

1. Move the working table to a distance approx. 10 cm under the lens holder.
2. Move the working head into the center of the working surface and put a cloth under the
lens holder (so that the lens is not damaged if it accidentally falls out of its holder).
3. Now you can remove the lens by turning the fixing ring and pulling the lens assembly to
the front.
4. Remove the coarse dust as good as possible by blowing air onto the lens surface.
5. Check the surface and if necessary clean the lens with the lens cleaning liquid and lens
tissue.
28/07/2015 Trotec Produktions- und Vertriebs GmbH_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto:
Part number 69249
Part number 69248
techsupport@troteclaser.com
42 / 54