Service; Src-Ip; Src-Port; Table 50 Service Command - Nokia 7302 Basics, Management And Oam Manual

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
4.4.2.14
Table 50
4.4.2.15
Table 51
4.4.2.16
Table 52
(1 of 2)
Issue: 10

service

service command
Item Description
Syntax [no] service service-id
Context configure>system>security>cpu-filter>ip-filter>entry>match
Description This command specifies a service-id to be used in the match criteria.
Parameters service-id — Specifies an existing service ID to be used in the match criteria. Only services of
type IES, VPRN and v-VPLS are allowed.
Values: 1 — 2147483647

src-ip

src-ip command
Item Description
Syntax [no] src-ip {ip-address[/mask] | [ip-address netmask]
Context configure>system>security>cpu-filter>ip-filter>entry>match
Description This command configures a source IP address range to be used as an IP filter match criterion.
To match on the source IP address, specify the address and its associated mask, e.g.
10.1.0.0/16. The conventional notation of 10.1.0.0 255.255.0.0 may also be used.
The no form of the command removes the source IP address match criterion.
Parameters ip-address — The IP prefix for the IP match criterion in dotted decimal notation.
Values: 0.0.0.0 — 255.255.255.255
mask — The subnet mask length expressed as a decimal integer.
Values: 1 — 32
netmask — Any mask expressed in dotted quad notation.
Values: 0.0.0.0 — 255.255.255.255

src-port

src-port command
Item Description
Syntax [no] src-port src-port-number [mask]
3HH-11982-AAAA-TQZZA
Security
59