Lag Commands; Lag; Table 94 Lag Command - Nokia 7302 Basics, Management And Oam Manual

Intelligent services access manager/fttn/fx, fd 100/320gbps nt and fx nt ihub system
Hide thumbs Also See for 7302:
Table of Contents

Advertisement

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
----------------------------------------------------------------------------
Ing. Matches: 0
----------------------------------------------------------------------------
At time t = 15 sec (Mode: Rate)
----------------------------------------------------------------------------
Ing. Matches: 0
============================================================================
A:ALA-1>monitor>filter#
5.3.2
5.3.2.1
Table 94
Sample output:
Issue: 10

LAG Commands

lag

lag command
Item
Description
Syntax
lag lag-id [lag-id...(up to 5 max [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor
Description
This command monitors traffic statistics for Link Aggregation Group (LAG) ports. Statistical
information for the specified LAG ID(s) displays at the configured interval until the configured
count is reached.
The first screen displays the current statistics related to the specified LAG ID. The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the rate keyword is specified, the "rate per second" for each statistic is displayed instead
of the delta.
Monitor commands are similar to show commands but only statistical information displays.
Monitor commands display the selected statistics according to the configured number of times
at the interval specified.
Parameters
lag-id — The number of the LAG.
Default: none — The LAG ID value must be specified.
Values: 1 — 64
interval seconds — Configures the interval for each display in seconds.
Default: 10 seconds
Values: 5 — 60
repeat repeat — Configures how many times the command is repeated.
Default: 10
Values: 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
instead of the delta.
3HH-11982-AAAA-TQZZA
Egr. Matches
: 0
Egr. Matches
: 0
Monitor Commands
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

73307360

Table of Contents