Nokia 7302 Basics, Management And Oam Manual page 89

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
(2 of 2)
Sample output:
A:ALA-12>monitor>router>isis# statistics interval 5 repeat 2 absolute
============================================================================
ISIS Statistics
============================================================================
At time t = 0 sec (Base Statistics)
----------------------------------------------------------------------------
ISIS Instance : 1
Purge Initiated : 0
CSPF Statistics
Requests : 0
Paths Found : 0
----------------------------------------------------------------------------
PDU Type Received
----------------------------------------------------------------------------
LSP 0
IIH 0
CSNP 0
PSNP 0
Unknown 0
----------------------------------------------------------------------------
At time t = 5 sec (Mode: Absolute)
----------------------------------------------------------------------------
ISIS Instance : 1
Purge Initiated : 0
CSPF Statistics
Requests : 0
Paths Found : 0
----------------------------------------------------------------------------
PDU Type Received
Issue: 10
Item Description
Description This command displays statistical IS-IS traffic information at the configured interval until the
configured count is reached.
The first screen displays the current statistics related to the specified router statistics. The
subsequent statistical information listed for each interval is displayed as a delta to the previous
display.
When the rate keyword is specified, the "rate per second" for each statistic is displayed instead
of the delta.
Monitor commands are similar to show commands but only statistical information displays.
Monitor commands display the selected statistics according to the configured number of times
at the interval specified.
Parameters interval seconds — Configures the interval for each display in seconds.
Default: 10 seconds
Values: 5 — 60
repeat repeat — Configures how many times the command is repeated.
Default: 10
Values: 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
instead of the delta.
Processed Dropped
0 0
0 0
0 0
0 0
0 0
Processed Dropped
3HH-11982-AAAA-TQZZA
SPF Runs : 2
LSP Regens. : 11
Request Drops : 0
Paths Not Found: 0
Sent Retransmitted
0 0
74 0
0 0
0 0
0 0
SPF Runs : 2
LSP Regens. : 11
Request Drops : 0
Paths Not Found: 0
Sent Retransmitted
Monitor Commands
89