Lsp-Sync-Exit; Run-Manual-Spf; Mpls; Table 190 Lsp-Sync-Exit Command - Nokia 7302 Basics, Management And Oam Manual

Tools
7.2.3.9
Table 190
7.2.3.10
Table 191
7.2.3.11
Table 192
160

lsp-sync-exit

lsp-sync-exit command
Item Description
Syntax [no] ldp-sync-exit
Context tools>perform>router>isis
tools>perform>router>ospf
Description This command restores the actual cost of an interface at any time. When this command is
executed, IGP immediately advertises the actual value of the link cost for all interfaces which
have the IGPLDP synchronization enabled if the currently advertised cost is different.

run-manual-spf

run-manual-spf command
Item Description
Syntax run-manual-spf
Context tools>perform>router>isis
Description This command runs the Shortest Path First (SPF) algorithm.

mpls

mpls command
Item Description
Syntax mpls
Context tools>perform>router
Description This command enables the context to perform specific MPLS tasks.
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10