Message- Fast-Tx-Init; Reinit-Delay; Shutdown - Nokia 7302 Basics, Management And Oam Manual

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
9.3.1.3
Table 243
9.3.1.4
Table 244
9.3.1.5
Table 245
(1 of 2)
Issue: 10

message- fast-tx-init

message-fast-tx-init command
Item Description
Syntax message-fast-tx-init count
no message-fast-tx-init
Context configure>system>lldp
Description This command configures the number of LLDPDUs to send during the fast transmission period.
The no form of the command returns the number to the default number.
Default 4
Parameters count — Specifies the number of LLDPDUs to send during the fast transmission period.
Values: 1..8

reinit-delay

reinit-delay command
Item Description
Syntax reinit-delay time
no reinit-delay
Context configure>system>lldp
Description This command configures the time (in seconds) before re-initializing LLDP on a port.
The no form of the command returns the time to the default time.
Default 2
Parameters time — Specifies the time, in seconds, before re-initializing LLDP on a port.
Values: 1..10

shutdown

shutdown command
Item Description
Syntax shutdown
no shutdown
Context configure>system>lldp
3HH-11982-AAAA-TQZZA
Link Layer Discovery Protocol
215