System Management
3.5.1.3
Table 7
3.5.1.4
Table 8
3.5.1.5
Table 9
30
ntp
ntp command
Item
Description
Syntax
ntp
Context
configure>system>time
Description
This command enables the context to configure NTP client parameters. The ISAM can retrieve
its system time using the NTP protocol, with up to 5 NTP servers used.
polling-rate
polling-rate command
Item
Description
Syntax
polling-rate polling-rate
Context
configure>system>time>ntp
Description
This command configures the polling rate.
Default
10
Parameters
polling-rate — rate at which the servers are polled as a power of 2.
server
server command
Item
Description
Syntax
server ip-address [server-port udp port]
no server ip-address
Context
configure>system>time>ntp
Description
This command configures the NTP server. Up to 5 NTP servers can be configured.
The no form of the command removes the server from the NTP server list.
Parameters
ip-address — Specifies the IP address of the NTP server.
Parameters
server-port — Specifies the UDP port on which the NTP server receives packets.
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10