Tx-Credit-Max; Tx-Hold-Multiplier - Nokia 7302 Basics, Management And Oam Manual

Link Layer Discovery Protocol
(2 of 2)
9.3.1.6
Table 246
9.3.1.7
Table 247
216
Item Description
Description This command enables/disables LLDP on a system wide level.
Default no shutdown

tx-credit-max

tx-credit-max command
Item Description
Syntax tx-credit-max count
no tx-credit-max
Context configure>system>lldp
Description This command configures the maximum number of consecutive LLDPDUs transmitted.
The no form of the command returns the value to the default value.
Default 5
Parameters count — Specifies the maximum number of consecutive LLDPDUs transmitted.
Values: 1..100

tx-hold-multiplier

tx-hold-multiplier command
Item Description
Syntax tx-hold-multiplier multiplier
no tx-hold-multiplier
Context configure>system>lldp
Description This command configures the multiplier of the tx interval.
The no form of the command returns the value to the default value.
Default 4
Parameters multiplier — Specifies the multiplier of the tx interval.
Values: 2..10
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10