Tx-Interval; Show Commands; Lldp - Nokia 7302 Basics, Management And Oam Manual

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
9.3.1.8
Table 248
9.3.2
9.3.2.1
Table 249
Table
Table 250
(1 of 2)
Issue: 10

tx-interval

tx-interval command
Item Description
Syntax tx-interval interval
no tx-interval
Context configure>system>lldp
Description This command configures the LLDP transmit interval time.
The no form of the command returns the value to the default value.
Default 5
Parameters interval — Specifies the LLDP transmit interval time.
Values: 1..100

Show Commands

lldp

lldp command
Item Description
Syntax lldp
Context show>system
Description This command shows the Link Layer Discovery Protocol (LLDP) system information.
250 describes the LLDP configuration output fields.
LLDP configuration output fields
Label
Transmit Interval
Hold Multiplier
Reinit Delay
Tx Credit Max
3HH-11982-AAAA-TQZZA
Description
Shows the LLDP transmit interval time configured.
Shows the configured hold-multiplier of the LLDP transmit interval.
Shows the configured re-init delay time before re-initializing LLDP on a port.
Shows the tx-credit max configured, to set the maximum consecutive LLDPDUs
transmitted.
Link Layer Discovery Protocol
217