Show Commands; Event-Control; Table 125 To Command; Table 126 Event-Control Command - Nokia 7302 Basics, Management And Oam Manual

Intelligent services access manager/fttn/fx, fd 100/320gbps nt and fx nt ihub system
Hide thumbs Also See for 7302:
Table of Contents

Advertisement

Events and Logs
(2 of 2)
6.8.6.3
Table 125
6.8.7
6.8.7.1
Table 126
(1 of 2)
132
Item
Description
Default
No log destinations are defined.
Parameters
log-id — The log ID number, expressed as a decimal integer.
Values: 1 — 100
to
to command
Item
Description
Syntax
to session
Context
configure>log>log-id log-id
Description
This command specifies a log ID destination. This parameter is mandatory when configuring a
log destination. This command instructs the events selected for the log ID to be directed to the
current CLI session. This command is only valid for the duration of the session. When the
session is terminated the log ID is removed. A log ID with a session destination is not saved in
the configuration file.
The source of the data stream must be specified in the from command prior to configuring the
destination with the to command.
Default
None

Show Commands

event-control

event-control command
Item
Description
Syntax
event-control [application-id [event-name | event-number]
Context
show>log
Description
Displays event control settings for events including whether the event is suppressed or
generated and the severity level for the event.
If no options are specified all events, alarms and traps are listed.
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

73307360

Table of Contents