Mpls; Ftn; Table 154 Mpls Command; Table 155 Ftn Command - Nokia 7302 Basics, Management And Oam Manual

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
7.2.2.21
Table 154
7.2.2.22
Table 155
Issue: 10

mpls

mpls command
Item Description
Syntax mpls
Context tools>dump>router
Description This command enables the context to display MPLS information.

ftn

ftn command
Item Description
Syntax ftn [endpoint endpoint | sender sender | nexthop nexthop |
lsp-id lsp-id| tunnel-id tunnel-id | label start-label end-label]
Context tools>dump>router>mpls
Description This command displays FEC-to-NHLFE (FTN) dump information for MPLS (NHLFE is the
acronym for Next Hop Label Forwarding Entry).
Parameters endpoint endpoint — Specifies the IP address of the last hop.
Value: IP address (a.b.c.d)
sender sender — Specifies the IP address of the sender.
Value: IP address (a.b.c.d)
nexthop nexthop — Specifies the IP address of the next hop.
Value: IP address (a.b.c.d)
lsp-id lsp-id — Specifies the LSP ID.
Values: 0 — 65535
tunnel-id tunnel-id — Specifies the tunnel ID.
Values: 0 — 65535
label start-label end-label — Specifies the label switched path that is signaled for this entry.
Values: start-label: 32 — 131071
end-label: 32 — 131071
3HH-11982-AAAA-TQZZA
Tools
147