Mep; Table 232 Mep Command - Nokia 7302 Basics, Management And Oam Manual

Ethernet Connection Fault Management
====================================================================
8.12.3.4
Table 232
Table
Table 233
(1 of 2)
198

mep

mep command
Item Description
Syntax mep mep-id domain md-index association ma-index [loopback]
Context show>eth-cfm
Description This command displays Maintenance Endpoint (MEP) information.
Parameters domain md-index - Displays the index of the MD to which the MP is associated, or 0, if none.
association ma-index - Displays the index to which the MP is associated, or 0, if none.
loopback - Displays loopback information for the specified MEP.
linktrace - Displays linktrace information for the specified MEP.
233 shows the command output fields.
Show eth-cfm mep command output fields
Label Description
Md-index Index of the MD
Ma-index Index of the MA
Mep Id MEP Id
Sdp Id SDP Id on which MEP configured
FngState Indicates the different states of the MEP Fault Notification Generator State Machine
LowestDefectPri Lowest priority defect configured
Defect Flags Defect flags set currently
Mac Address Mac address of the MEP
Ccm Tx Number of CCM frames transmitted on this MEP
Fault Propagation Fault propagation status
CcmLastFailure Display last ccm failure frame
Frame
XconccmFailure Display xcon failure frame
Frame
Direction Direction of the MEP
Admin Admin state of the MEP
CCM-Enable Ccm enabled state on the MEP
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
[linktrace]
Issue: 10