"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
6.8.5.4
Table 120
6.8.5.5
Table 121
Issue: 10
router
router command
Item
Description
Syntax
router {eq | neq} router-name [regexp]
no router
Context
configure>log>filter>entry>match
Description
This command specifies the log event matches for the router.
Parameters
eq — Determines if the matching criteria should be equal to the specified value.
neq — Determines if the matching criteria should not be equal to the specified value.
router-name — Specifies a router name up to 32 characters to be used in the match criteria.
regexp — Specifies the type of string comparison to use to determine if the log event matches
the value of router command parameters. When the regexp keyword is specified, the string in
the router command is a regular expression string that will be matched against the subject
string in the log event being filtered.
severity
severity command
Item
Description
Syntax
severity {eq | neq | lt | lte | gt | gte} severity-level
no severity
Context
configure>log>filter>entry>match
Description
This command adds an event severity level as a match criterion. Only one severity command
can be entered per event filter entry. The latest severity command overwrites the previous
command.
The no form of the command removes the severity match criterion.
Default
no severity — No severity level match criterion is specified.
Parameters
eq | neq | lt | lte | gt | gte — This operator specifies the type of match. Valid operators are:
•
eq: equal to
•
neq: not equal to
•
lt: less than
•
lte: less than or equal to
•
gt: greater than
•
gte: greater than or equal to
severity-name — The ITU severity level name. See Table
corresponding numbers per ITU standards M.3100 X.733 & X.21 severity levels.
Values: cleared, indeterminate, critical, major, minor, warning
3HH-11982-AAAA-TQZZA
Events and Logs
107
for the severity names and
129