King Industrial KC-60FX Instruction Manual page 13

MOUNTING THE FENCE ONTO THE TABLE
1. The fence (A) shall be mounted at the rear side of the table.
2. Before installing the fence, remove the lock nut from the fixing shaft (F).
3. Place the fence on the table and align the slot (C) with the gib (D), then insert the
fixing shaft (F) through the opening (E).
4. Fit the lock nut on the fixing shaft (F).
FIXING SHAFT (F)
FENCE (A)
SLOT (C)
GIB (D)
SLOT (E)