Alarms - GIRBAU ED260 Operation And Maintenance Instruction Manual

10.2. Alarms

To increase safety levels in operating the dryer and to protect both the linen being dried and the machines
components, the microprocessor has the capacity to detect the presence of the most significant malfunctions that
might possibly occur.
When an alarm is triggered, the alarm symbol is displayed and the buzzer is activated.
Press the
Alarm management
The occurrence of an alarm automatically causes the heating system to switch off and the cancellation of the
program.
The drum rotation and the exhaust fan continue to work as long as the alarm does not affect the control of these
components.
Once an alarm is detected, press the key
display will show the report corresponding to the alarm.
Press the key to cancel the audible alert.
Once the problem that caused the alarm has been
solved, press the
cancelled.
CAUTION!
Procedure in the event of an alarm
Any procedure aimed at rectifying the fault provoking an alarm that involves removing the protection covers has
to be performed by the Customer's Technical Assistance Service or by the Authorised Technical Assistance
Service, and never by the user of the machine.
Do not carry out any operation not described in this section.
DANGER!
BEFORE COMMENCING ANY PROCEDURE WHICH INVOLVES REMOVING THE PROTECTION COVERS:
 DISCONNECT AND MECHANICALLY LOCK THE MACHINE'S BREAKER SWITCH.
 CLOSE AND MECHANICALLY LOCK THE MANUAL GAS VALVE (machines heated with gas).
 WAIT A MINIMUM OF FIVE MINUTES TO ELIMINATE THE RISK OF ANY RESIDUAL VOLTAGE AND TO
ENSURE THAT THERE ARE NO PARTS IN MOVEMENT.
 CHECK THAT THE TEMPERATURE OF THE MACHINE IS NOT TOO HIGH TO CARRY OUT THE
PROCEDURES SAFELY.
key for five seconds to access the alarm management screen.
. The
key. The alarm will be
Alarms
KEY
Information on the cause of the alarm
Stopping the alert beep
Cancelling the alarm (if possible)
37
FUNCTION
Code no. 576017
Rev. nº 02/0415