Configuration Menu; Settings; General Settings; Temperature Unit - GIRBAU ED260 Operation And Maintenance Instruction Manual

Ed coin dryers
Table of Contents

Advertisement

7. CONFIGURATION MENU

The CONFIGURATION menu contains many settings that allow the operation of the dryer to be adapted to the
specific needs of each user.
Details of the CONFIGURATION menu

7.1. Settings

7.1.1. General settings

Language: Permits selecting the language of all the written messages.
Programmable values
Factory settings
Default value
Temperature unit: Permits selecting the unit that the temperature values are displayed in.
Programmable values
Factory settings
Default value
Beep on keypress: An acoustic warning that the dryer emits when a key is pressed.
Programmable values
Default value
Screen contrast: Permits modifying the contrast on the dryer screen.
Programmable range
Default value
Blink on end: Shows end of cycle screen flashing.
Programmable values
Default value
Maximum lint filter cleaning time: This allows the user to set a number of hours after which, if the filter door has
not been opened, the dryer will display a discreet filter cleaning reminder.
Programmable range
Default value
Machine ID: This parameter assigns a network identifier to the dryer. This identifier enables the communication of
the dryer with the environment through a system based on RS-485 protocol.
Programmable range
Default value
Configuration menu
: ESP (Spanish), ENG (English), FRA (French), ITA (Italian), DE (German), CAT
(Catalan).
: depending on specification.
: English.
: C (degrees Celsius)
| F (degrees Fahrenheit).
: depending on specification.
: Degrees Celcius.
: YES / NO
: YES
: 0 (less contrast) ... 9 (more contrast).
: 4
: YES / NO
: YES
: from 0 to 48 hours. Programming 0: deactivates the cleaning reminder
: 2
When the number of hours since the last opening of the
filter door is equal to the set value, the machine will report
this by turning off a pixel in the upper right corner of the
screen frame (position A in the attached figure).
: 0 (disabled communications) ... 1-99 (enabled communications)
: 0
26
Code no. 576017
Rev. nº 02/0415

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents