THORLABS ITC502 Operation Manual page 93

[103, "Invalid text parameter"]
Category:
Possible reasons: ":SENS hhh". This parameter is not valid.
[109, "Wrong compound"]
Category:
Possible reason:
[110, "Unknown compound"]
Category:
Possible reason:
[111, "Wrong parameter"]
Category:
Possible reason:
[190, "Parser buffer overflow"]
Category:
Possible reason:
[200, "Data out of range"]
Category:
Possible reason:
[300, "Hardware error"]
Category:
Possible reason:
[301, "Software error"]
Category:
Possible reason:
[302, "Not implemented yet"]
Category:
Possible reason:
Command Error
Command Error
":ILD:ERR?". This combination is not allowed.
Command Error
":ILD:XXX?". This compound is not known.
Command Error
":LASER CG". This compound is not valid for this command.
Command Error
The string sent to the ITC5xx was too long for the parser.
Execution Error
":ILD:SET 10E+30" sent to the ITC5xx but this current is
much too high.
Device Error
Many. Device must probably be maintained.
Device Error
Unexpected error. Please contact Thorlabs.
Device Error
Feature not enabled. Please contact Thorlabs.
3.7 Error messages of the ITC5xx
ITC500 / page 85