Service-Request-Enable-Register (Sre); Query Status-Byte-Register (Stb) - THORLABS ITC502 Operation Manual

3.3.9 Service-Request-Enable-Register (SRE)

Programming:
Syntax:
"*SRE <NR1>"
Valid Range: 0..255
Default Value: 0
Description: Sets the Service-Request-Enable-Register (SRE).
Reading:
Syntax:
"*SRE?"
Response:
[<NR1>]
Description: Queries the Service-Request-Enable-Register (ESE) and returns the
content in decimal notation. The content is not modified.

3.3.10 Query Status-Byte-Register (STB)

Syntax:
"*STB?"
Response:
[<NR1>]
Description: Queries the Status-Byte-Register (STB) and returns the content in
decimal notation. Bit 6 (MSS) is set to 0, the other bits keep
unchanged.
3.3 Common commands and queries
ITC500 / page 67