Resistance Of The Thermistor (Resi) - THORLABS ITC502 Operation Manual

3.6 ITC5xx specific commands

3.6.18 Resistance of the thermistor (RESI)

Programming:
Syntax:
":RESI:SET <NR3>"
Valid Range: Depends on the instrument type and the selected temperature sensor.
Default Value: Depends on the selected thermistor range.
Assumption: The temperature sensor is set to thermistor (high or low range).
Description: Sets the TEC thermistor resistance. Unit: [Ω].
Reading the set resistance:
Syntax:
":RESI:SET?"
Response:
[:RESI:SET <NR3>]
Assumption: The temperature sensor is set to thermistor (high or low range).
Description: Queries the programmed thermistor resistance. Unit: [Ω].
Reading the minimum resistance:
Syntax:
":RESI:MIN?"
Response:
[:RESI:MIN <NR3>]
Assumption: The temperature sensor is set to thermistor (high or low range).
Description: Queries the minimum allowed thermistor resistance. Unit: [Ω].
Reading the maximum resistance:
Syntax:
":RESI:MAX?"
Response:
[:RESI:MAX <NR3>]
Assumption: The temperature sensor is set to thermistor (high or low range).
Description: Queries the maximum allowed thermistor resistance. Unit: [Ω].
Reading the actual resistance:
Syntax:
":RESI:ACT?"
Response:
[:RESI:ACT <NR3>]
Assumption: The temperature sensor is set to thermistor (high or low range).
Description: Queries the actual thermistor resistance. Unit: [Ω].
ITC500 / page 82