Querying The Error Queue; Averaging Rate - THORLABS ITC502 Operation Manual

3.4.3 Querying the error queue

Syntax:
":SYST:ERR?"
Response:
[0, "No Error"]
Description: Queries the error queue of the ITC5xx. The reply consists of the
following sequence: <Error No.>, "<Error text>". If the error queue is
empty:
(Please refer to chapter 3.7, "Error messages of the ITC5xx", starting on page 84)

3.4.4 Averaging rate

Programming:
Syntax:
":SYST:OSR <NR1>"
Valid Range: 0..7
Default Value: 5
Description: Sets the ITC5xx averaging rate (see table below).
Reading:
Syntax:
":SYST:OSR?"
Response:
[<NR1>]
Description: Queries the averaging rate.
Sampling rate
[0, "No error"]
Resolution
0 11 Bit + sign
1 12 Bit + sign
2 13 Bit + sign
3 14 Bit + sign
4 15 Bit + sign
5 16 Bit + sign
6 17 Bit + sign
7 18 Bit + sign
3.4 System command group
is given.
Measurement speed
18 / s
13 / s
10 / s
8 / s
6 / s
4 / s
3 / s
2 / s
ITC500 / page 69