Operation-Complete Query; Wait; Event-Status-Enable-Register (Ese); Query Standard-Event-Status-Register (Esr) - THORLABS ITC502 Operation Manual

3.3 Common commands and queries

3.3.5 Operation-complete query

Syntax:
"*OPC?"
Response:
[1]
Description: 1: Operation completed.

3.3.6 Wait

Syntax:
"*WAI"
Description: The ITC5xx will wait until the last operation is completed.

3.3.7 Event-Status-Enable-Register (ESE)

Programming:
Syntax:
"*ESE <NR1>"
Valid Range: 0..255
Default Value: 0
Description: Sets the Event-Status-Enable-Register (ESE).
Reading:
Syntax:
"*ESE?"
Response:
[<NR1>]
Description: Queries the Event-Status-Enable-Register (ESE) and returns the
content in decimal notation. The content is not modified.

3.3.8 Query Standard-Event-Status-Register (ESR)

Syntax:
"*ESR?"
Response:
[<NR1>]
Description: Queries the Standard-Event-Status-Register (ESR) and returns the
content in decimal notation. The content is cleared.
ITC500 / page 66