General Description Of The Itc5Xx Controller; Packing List; Safety - THORLABS ITC502 Operation Manual

1 General description of the ITC5xx controller

1.1 Packing List

1 ITC502 or ITC510 packed in plastic form parts
1 power cord, connector according to ordering country
1 operation manual
1 CD-ROM with Drivers (for ITC5xx-IEEE)
1 Connection cable CAB 400
1 Connection cable CAB 420-15

1.2 Safety

All statements regarding safety of operation and technical data in
this instruction manual will only apply when the unit is operated
Before applying power to your ITC5xx system, make sure that the
protective conductor of the 3 conductor mains power cord is
correctly connected to the protective earth contact of the socket
Improper grounding can cause electric shock with damage to your
Also make sure that the line voltage setting marked on the rear panel
agrees with your local supply and that the corresponding fuses are
inserted. If not, please change the voltage (see 4.3) and.
Prior to operation make sure that the correct line voltage is set and
All in- or outputs must only be operated with duly shielded
Attention
correctly.
outlet!
health or even death!
the mains fuse (see section 4.4)
the appropriate fuse inserted.
connection cables.
1.1 Packing List
ITC500 / page 1