Table of Contents
Advertisement
®
HERAcell
240 CO
Incubator Operating Instructions
2
10. Cleaning and Disinfection
10.2 Cleaning
CAUTION – Hazardous fluids:
Certain unit components are made of pla-
stics. Solvents can dissolve plastics.
Strong acids and bases can make plastics
brittle.
Do not use solvents containing hydrocar-
bons, agents with an alcohol content grea-
ter than 10 %, or strong acids and bases to
clean plastic components!
Cleaning the Sample Chamber Prior to Disinfec-
tion:
1. Wipe down the sample chamber surfaces with lu-
kewarm water containing a household dishwa-
shing liquid.
2. Remove any stubborn residue with lukewarm
water and dishwashing liquid.
3. Use a soft, clean cloth to wipe the surfaces dry.
Cleaning the Unit Exterior:
1. Wipe down the exterior surfaces with lukewarm
water containing a household dishwashing liquid.
2. Use a soft, clean cloth to wipe the surfaces dry.
Version: 03.2001 / 50065640
10.3 Manual Disinfection
The unit can be disinfected by hand using a disinfec-
ting rinse/spray.
The rack system components as well as the fan wheel
and its protective screen can be autoclaved.
CAUTION – Disinfecting agents containing
When mixed with air, disinfecting agents
containing more than 10 % alcohol form
highly flammable and explosive gas mixtu-
res.
When using such agents, avoid open fla-
mes or high temperatures during the disin-
fection process!
•
Only use such disinfecting agents in well ven-
tilated rooms.
•
Dry all treated components thoroughly after
the disinfecting agent has been used.
•
Observe all regulations governing the preven-
tion of fires and explosions by disinfecting
agents containing alcohol (ZH 1/598) .
CAUTION – Disinfecting agents containing
Disinfecting agents containing chlorides
can result in corrosion to stainless steel
components.
Only employ disinfecting agents which are
not harmful to stainless steel!
- 49 -
alcohol:
chlorides:
Hide quick links:
Advertisement
Table of Contents
