Microprocessor Self-Test - Kendro HERAcell 240 Operating Instructions Manual

®
HERAcell 240 CO Incubator Operating Instructions
2
7. Control, Displays, Indicators
7.3

Microprocessor Self-test

After the unit has been switched on at the main power switch, the microprocessor performs a self-test routine.
No Instruction
1. Switch the unit on.
2. Test routine complete.
NOTE – Factory presets:
The following setpoints have been preset at the factory:
•
Temperature: 37 °C
•
CO content: 0.0 %
2
Version: 03.2001 / 50065640
Operator action
Press the main power switch.
- 37 -
Display / explanation
All indicators on the control panel go on.
The software version designation is
shown on the temperature display and the
CO display.
2
Example:
The temperature display shows the actual
temperature and the CO
tual CO value.
2
Example:
display the ac-
2