7.
Control, Displays, Indicators
7.1
Main Power Switch
Depending on the location of the door stop, the main
power switch is integrated into one of the two front
feet on the front cover [1].
•
Switching the unit on:
Press the main power switch [2]. The button indi-
cator light goes on.
•
Switching the unit off:
Press the main power switch. The button indicator
light goes out.
7.2
Control Panel
The control panel is divided into three functional
areas:
•
2 displays to indicate numeric values for tempe-
rature and CO
content;
2
•
8 keys to call up functions and input data;
•
7 LED indicators showing a function or state.
[1]
Temperature display
[2]
LED indicator, heating
[3]
Key, specify temperature setpoint
[4]
Key, increase value
[5]
Key, query errors / shut off audible alarm
[6]
Key, activate auto-start
[7]
LED indicator, auto-start active
[8]
LED indicator, (door open)
[9]
LED indicator, ContraCon decontamination
routine active
[10]
LED indicator, overtemperature protection ac-
tive
[11]
LED indicator, low humidity active
[12]
Key, start ContraCon decontamination routine
[13]
Key, start calibration function
[14]
Key, decrease value
[15]
Key, define CO
[16]
LED indicator, gas flowing
[17]
CO
display
2
setpoint
2
HERAcell
Figure 20 / 21
Fig. 20, Switch the unit on/off
Fig. 21, Control panel functions
- 36 -
®
240 CO
Incubator Operating Instructions
2
Version: 03.2001 / 50065640