Table of Contents
Advertisement
Console Redirection
Console redirection lets you monitor and control the system from a remote station by re-direct-
ing the host screen output through a serial port.
Console Serial Redirect
Enable or disable the console redirection function. (The default is disabled.)
If you select to enable it, please configure the following parameters for serial
communication between the system and a remote station:
Terminal type: VT_100, VT_100+, VT_UTF8, or PC_ANSI.
Baud rate: 115200, 57600, 38400, 19200 and 9600.
Data bits: 8 bits or 7 bits.
Parity: None, Even or Odd.
Stop bits: 1 bit or 2 bits.
Flow control: None, RTS/CTS or XON/XOFF
This is the global setting for all of the designated serial ports for the console
redirection function.
Chapter 7 BIOS Setup
Chapter 7
COM 1
Enable or disable the serial redirection function for COM1 port on the system and config-
ure the serial communication parameters to be used between the system and a remote
station.
UseGlobalSetting
Choose to use the pre-configured global settings from the previous menu or configure a
different setting for this serial port.
28
Advertisement
Table of Contents
