Table of Contents
Advertisement
ACPI Configuration
This section configures system ACPI parameters.
Wake on LAN
Enable or disable WOL (wake-on-LAN) to wake the system through an Ethernet adapter.
After G3
This field is to specify which state the system should be in when power is re-applied
after a power failure (G3, the mechanical-off, state).
Always On The system is powered on.
Always Off The system is powered off.
Chapter 7 BIOS Setup
Chapter 7
CPU Configuration
This section configures the CPU.
EIST
Enable or disable the Enhanced Intel
the balance between system's power consumption and performance. After it is enabled
in the BIOS, you can take advantage of its offering by setting power schemes from the
operating system's power options.
Turbo Mode
Enable or disable processor turbo mode, which allows the processor core to automati-
cally run faster than the base frequency by taking advantage of thermal and power
headroom.
C-States
Enable or disable CPU power management. It allows the CPU to go to C states when
it's not 100% utilized.
25
SpeedStep
Technology, which helps optimize
®
®
Advertisement
Table of Contents
