Table of Contents
Advertisement
Installing a Mini PCIe Card
The system board is equipped with one Mini PCIe slot that supports both PCIe and USB interfaces.
1.
Grasp the Mini PCIe card by its edges and align the notch in the connector of the PCIe card
with the key in the connector on the system board. Insert the bottom edge of the card into
the socket.
2.
Push down on the other end of the Mini PCIe card and use the provided mounting screw to
secure the card on the system board. Route the antenna(s) to the antenna holes on side of
the chassis.
Antenna hole
Note:
If installing a wireless module, place the antenna cable(s) on top of the Mini PCIe
and route the cables to the side of the chassis to reach the antenna holes.
Chapter 3 Installing Devices
Chapter 3
Mounting Screw
12
Advertisement
Table of Contents
